·
The 1st World Energy Storage Conference(May 18-19, 2019) |
|
|
Dear Colleague, It is our great pleasure to make an open invitation for The 1st World Energy Storage Conference (WESC-2019). WESC-2019 will be held in China National Convention Center, Beijing, China, May 18-19, 2019 and organized by International Energy Storage Alliance (INESA). The 1st World Energy St... |
|
|
|
·
Experimental study for shell-and-tube molten salt heat exchangers |
|
|
Molten salt heat exchangers are key components in some advanced power systems. Two shell-and-tube molten salt heat exchangers are experimentally investigated, including a gas cooled one with finned tubes and a molten salt to salt one with segmental baffles in the shell side. Based on a nonlinear regression sche... |
|
|
·
Exergy cost allocation method based on energy level (ECAEL) for a CCHP system |
|
|
A systematic method (ECAEL) is proposed for defining additional allocation equations and calculating the exergy cost of flows in thermal system. This method is based on the concept of the energy level, in which the continuous cost change within each component is considered. Thermoeconomic analysis using this me... |
|
|
·
The 1st World Energy Storage Conference |
|
|
Dear Colleague, It is our great pleasure to make an open invitation for The 1st World Energy Storage Conference (WESC-2019). WESC-2019 will be held in China National Convention Center, Beijing, China, May 18-19, 2019 and organized by International Energy Storage Alliance (INESA). The 1st World Energy St... |
|
|
·
Second-Law Analysis of Irreversible Losses in Gas Turbines |
|
|
Several fundamental concepts with respect to the second-law analysis (SLA) of the turbulent flows in gas turbines are discussed in this study. Entropy and exergy equations for compressible/incompressible flows in a rotating/non-rotating frame have been derived. The exergy transformation efficiency of a gas turb... |
|
|
·
Determining Division Location for Sectional Wind Turbine Blades |
|
|
Sectional wind turbine blades, by dividing an intact blade into multiple segments, have the advantage of being easy to handle and transport. To determine a suitable blade division location, this study was performed to clarify some crucial aspects and challenges for sectional blades. This paper proposes a method... |
|
|
|
|
|