Home|Site Map|Webmail|Contact|中文|CAS
Search
  Home About IET Institute Labs/Centers Research Scientists News & Events Education Papers Cooperation Join Us Links  
Research
Overview
Research Progresses
Supporting Work for Research
Equipment
Awards
Location: Home » Research » Research Progresses
Thermodynamic performance of a mid-temperature solar fuel system for cooling, heating and power generation
Author: Zhang Hao | Print | Close | Text Size: A A A | 2017-11-23

Solar thermal fuel is a promising approach of solar energy utilization, in which concentrating solar energy can drive the hydrocarbon fuel decomposition or steam reforming to produce hydrogen or syngas for generating power through heat engine. In the present, most of solar thermal fuel processes have employed solar heat at above 800 which needs higher-concentration-ratio solar cavity reactor with higher re-radiation loss, bringing about poor annually average efficiency of solar-fuel-power. Here, a mid-temperature solar thermal fuel system by using chemical looping combustion (CLC) is studied for producing cooling, heating and power. The concentrated solar heat at approximately 350 is utilized to drive the dimethyl ether fueled-chemical looping combustion with pair of CoO/Co as oxygen carrier. By using the mid-temperature solar heat driving CLC, the low-grade solar heat is upgraded into high-grade chemical energy of metal Co as solar fuel that is further converted into high-temperature thermal energy at 900 via oxidation of Co and drives a recuperated gas turbine for generating power. The waste heat from the gas turbine can be utilized to produce a double-effect water/lithium bromide absorption chiller for producing the cooling and the heating. The thermodynamic performance of this mid-temperature solar fuel system is analyzed and the effects of several operation parameters such as solar irradiation, production of the solar fuel and pressure ratio are examined. The annually average efficiency of solar-fuel-power can be about 21%, with approximately 5 percentage points higher than that of solar thermal power system. In addition, the reason of the improvement in the performance is revealed by the irreversibility methodology. Our results would be expected to bring a new pathway for the application of solar thermal fuel in the distributed CCHP technology.

 

Conclusions

Mid-temperature solar-driven chemical-looping combustion was presented to improve the net solar-to-electricity efficiency in this paper. The concentrated solar heat at 350 is used to drive dimethyl ether fueled CLC using CoO as one kind of oxygen carrier. The low-grade solar heat is upgraded to high-grade chemical energy of solar thermal fuel Co, where the storage and upgraded solar heat are re-released as thermal energy at approximately 900 to generate power via a micro-gas turbine. The peak net solar-to-electricity efficiency and solar energy utilization efficiency would be expected to be approximately 27.4% and 64.1% at a turbine inlet temperature (TIT) of 900, respectively. The daily net solar-to-electricity efficiency also keeps at high values on the off-design conditions, owing to the contribution of the solar-driven CLC process. Furthermore, the annual net solar-to-electricity efficiency and solar energy utilization efficiency are approximately as high as 21.1% and 48.8%, respectively. The promising results provide a possibility to resolve the problem of insufficient efficiency of solar energy systems in cloudy or sunless conditions via a solar-thermo chemical process without the need for an extra storage appliance.

 

The results have been published on Applied Thermal Engineering 106 (2016) 1268–1281.

 

 
Copyright © 1980–2009 Institute of Engineering Thermophysics, Chinese Academy of Sciences
11 Beisihuanxi Road, Beijing 100190, People's Republic of China
Phone: 86-10-62554126 E-mail: iet@iet.cn